CATERPILLAR BENCH FLASH HARNESSES

70 Pin Caterpillar Bench Flash Harness

Hi you are looking at a harness I made up to bench flash Caterpillar ECM's. This is for ECM's that have the 70 pin OEM connector. It is made with all new parts. I have tested it on an ECM to make sure it hooks ok. This cable is what will hook to ECM.                                                                                                                                                                                                                                                                                                                                                                                                                                                                             This one will hook to the following engine  ECM's with the following prefixes.

You use this cable along with your diagnostic device.

2WS, 1MM, 6NZ, 7CZ, MBN, BXS, MXS, NXS, SDP

There are more engines than listed here. Too many to list! If the OEM connector is 70 pin it will work. Cable is fuse protected.

Use this for bench programing, diagnostics, or test stand operation.

I carry a stock for immediate shipping. I ship on a daily basis.

Any questions please ask. Thanks

 

 

 

______________________________________________________________________________

70 Pin MACHINERY / AG Caterpillar Bench Flash Harness

Hi you are looking at a harness I made up to bench flash Caterpillar ECM's. This is for ECM's that have the 70 pin OEM connector. It is made with all new parts. I have tested it on an ECM to make sure it hooks ok. This cable is what will hook to ECM.                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This one will hook to off road equipment machinery ag

You use this cable along with your diagnostic device.

Cable is fuse protected.

Use this for bench programing, diagnostics, or test stand operation.

I carry a stock for immediate shipping. I ship on a daily basis.

Any questions please ask. Thanks

 

 

 

______________________________________________________________________________

40 Pin Caterpillar Bench Flash Harness

This is for ECM's that have the 40 pin OEM connector. It is made with all new parts. I have tested it on an ECM to make sure it hooks ok. This cable is what will hook to ECM.                                                                                                                          This one will hook to the following engine / ECM’s with the following prefixes.

5EK, 6TS,1LW,5DS.

Use this for bench programing, diagnostics, or test stand operation.

Cable is fuse protected. 

I carry a stock for immediate shipping. I ship on a daily basis.

 

You use this cable along with your diagnostic device.

________________________________________________________

 

 

Your form message has been successfully sent.

You have entered the following data:

Please fill out the form below and hit the send button. I will send you an invoice. Shipping in the US is FREE!

Please correct your input in the following fields:
Error while sending the form. Please try again later.

Note: Fields marked with * are required

Here's where you can enter in text. Feel free to edit, move, delete or add a different page element.

 

 

Print Print | Sitemap
© MIKE'S POWER WIRE