Caterpillar cables

Caterpillar Fuel Temp and Boost Cables

If You Are looking for more power at highway speeds, then this is the harness you need! Will work on 1993 and newer C15 and C16 engines. Also will work on C10 and C12 engines. With fuel temp sensors.

There are three different styles depending on your engine. (See picture) You will need to let me know your engine serial # and I will get you the correct cable. MXS engines I need complete serial number.

These are quality made up using new factory parts. All connections are soldered and sealed with heat shrink tubing. They are weather tight and are made to last. Be careful of others that are made cheaply.

This has been a really good seller for truckers who are looking to make their Cats run a little better. I have sold many of these harnesses and have had lots of good feed back and a lot of referrals. Very simple to install. This cable simply installs in the fuel temp sensor mounted on top of the fuel filter housing located on the side of the engine. Unplug the sensor and install this cable inbetween the sensor and OEM harness. Can be removed just as easily

The fuel harness is made for more pulling power at highway speeds. Will also give you better fuel mileage.

This can also be ran with the Boost Cable.

Any questions please email me. 

BOOST CABLE

This little harness does away with turbo lag, and gives you more power and torque faster. Use it on 3406E, C15, and C16 engines. Will Work on 1994-2008 engines.

 MXS engines I need copmlete serial number. .

These are quality made up using new factory parts. All connections are soldered and sealed with heat shrink tubing. They are weather tight and are made to last.

This has been a really good seller for truckers who are looking to make their Cats run a little better. I have sold many of these boost harnesses and have had lots of good feed back and a lot of referrals. Cable works as is.  Verry simple to install. 

This harness runs at full boost increase, if you want to be able to control from inside the cab look at my adjustable set.

Any questions please email me. 

 

 

_____________________________________________________________

 

Caterpillar Combo Harness

Caterpillar Adjustable power set, add HP and MPG
This harness will give you more power off the line and pulling at highway speeds. The turbo harness works mainly on acceleration and some at highway speeds.
Use it on 3406E, C15, and C16 engines also C-12. Will Work on 1993 and newer engines.

These are quality made, using new factory parts. All connections are soldered and sealed with heat shrink tubing. They are weather tight.

You will get the Adjustable Boost cable and the Fuel temp cable. 
The turbo boost cable has a 10 foot lead and adjustable control. You run this inside the cab and mount on the dash. This is adjustable with a 10 position dial. Very simple to install.

Any questions please email me.
There are two different style harnesses. You will need to let me know your engine serial # prefix on order and I will get you the correct cables. MXS engines I need complete serial number. 

Your form message has been successfully sent.

You have entered the following data:

Please fill out the form below and hit the send button. I will send you an invoice. Shipping in the US is FREE!

Please correct your input in the following fields:
Error while sending the form. Please try again later.

Note: Fields marked with * are required

Print Print | Sitemap
© MIKE'S POWER WIRE