DODGE CUMMINS BENCH HARNESSES

ORDER FORM AND PRICING AT BOTTOM OF PAGE

This is the base harness that you use with all Cummins adapters. It has the ignition on/off switch and powers up the correct adapters.  It has the standard 9 pin diagnostic conector. Cable is fuse protected. Has a togle switch to simulate ignition switch.

You will need the correct adapter for the ECM you want to program and your diagnostic tool. I sell the adapters separate.

                                                     

You can also use this to test an ECM by taking the truck wiring out of the picture.  Or for test stand operation.                                                                                                                                              

    Any questions please ask.   Thank

 

___________________________________________________________________________________

 

THIS BENCH HARNESS IS FOR THE DODGE RAM

CUMMINS 6.7L ENGINES

CM2350B & CM2450B ECM'S  

YEARS 2013 TO CURRENT

USES MY STANDARD CUMMINS BASE HARNESS

FOR POWER UP, IGNITION & 9 PIN DIAGNOSTIC

PORT

THE 9 PIN DIAGNOSTIC PORT IS USED WITH

CUMMINS INSITE & CALTERM

IT ALSO HAS THE 16 PIN OBD2 DIAGNOSTIC

CONNECTOR FOR EFI LIVE

 

THIS BENCH HARNESS IS FOR THE DODGE RAM

CUMMINS 6.7L ENGINES

CM551D ECM'S  

Your form message has been successfully sent.

You have entered the following data:

Please fill out the order form below and hit the send button. I will send you an invoice. Shipping in the US is FREE!

Please correct your input in the following fields:
Error while sending the form. Please try again later.

Note: Fields marked with * are required

Here's where you can enter in text. Feel free to edit, move, delete or add a different page element.

 

 

Print Print | Sitemap
© MIKE'S POWER WIRE